if you use a laptop Acer Aspire 3410, and you have a problem hard drive is not detected when installing Windows XP, you have to do is install the drivers sata / AHCI to be able to continue the installation, Before you start to install Microsoft Windows XP operating system, you will need an optical drive, a USB floppy disk drive, a blank 1.44MB floppy diskette, and Microsoft Windows XP Professional/Home Edition Setup Disc (bootable).
- Extract AHCI F6 driver files to a blank 1.44MB floppy diskette.
- Connect the USB floppy drive and then boot up from the Microsoft Windows XP Professional/Home Edition Setup Disc to install operating system.
- At the beginning of the operating system installation, press [F6] to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Insert the floppy diskette you created in step 1.
- At this point you should be presented with a selection for one of the following controllers listed depending on your hardware version and configuration for AHCI Controllers:
- Select [Intel(R) NM10 Express Chipset]
- Highlight the selection that is appropriate for the hardware in your system and press Enter.
- Press Enter again to continue.
- Leave the floppy diskette in the system until the next reboot as the software will need to be copied from the floppy diskette again when setup is copying files.
No comments:
Post a Comment